top of page
Your old Dyson like new again
Dyson DC02 troubleshooting tips - suction, noise, electrical problems
If you are having suction problems with your Dyson DC02, first of all check both of your filters.
Remove both filters and switch your Dyson on, you will have either two S level filters or one S level filter and a HEPA filter like the pictures below:
If after removing the filters then the suction is normal again then you have found your problem, replace both filters. You can find the S level filters here and the HEPA filter here.
If after removing the filters the suction is still poor, then check if the suction from the wand/ hose is ok, if that is ok is it a problem with the pick up from the brushbar? Troubleshoot suction problems from both the wand or base below.
bottom of page